Spay VeroSpary Very Well 708 Isolation Primer 400ml

Quality and Properties

• Quick and easy to apply
• Excellent insulation and protection against many types of stains such as water stains on mineral surfaces (plaster, etc.), timber and concrete
• Can be recoated with all paints, alkyd- and water-based acrylic coatings
• Based on synthetic resins

Phisycal and Chemical data

• Basis of binder: Synthetic resins
• Colour: white
• Smell: solvent
• Efficiency:
  Depending on consistence and colour of the ground:
  400 ml are sufficient for approx. 1,0 - 1,5 m²
• Substrate:
  Wood, stone, beton, metal
• Drying time (at 20°C, 50% relative air humidity):
  Recoat after approx. 30 minutes
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature resistance: to 110°C
• Storage stability:
  10 years if appropriabte storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size:
  Aerosol cans, maximum nominal volume 400 ml
• VOC-value: 254,9 g

Environment and Labeling

• Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
• Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
• Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Instructions

Before use, carefully read and observe the warning texts on the label!

• Clean surfaces to be painted thoroughly with ColorMatic silicone cleaner no. 174469, then sand
• The area must be dry and free of dust and grease
• Shake can well for 3 minutes
• Carry out spray test
• 2-3 coats
• For professional use only
• Wear an appropriate respirator (type A2/P3)