Spay VeroSpary Very Well 1560 Transparent Opaque 400ml

Special niter acrylic paint. Professional Line.
It is available in a wide range of RAL colors. Ideal for DIY and decoration on metal, wood, glass,
cardboard and many hard plastics and many types of fabrics. For substrates in polystyrene foam use the Fund
Styrofoam insulation for DUPLI-COLOR.

Specifications

• good coverage
• lasting shine
• high hardness of the coated surface
• good elasticity
• uniform surface
• fast drying
• for interior and exterior
• polish
• resistant to light, UV and weathering
• resistant to scratches, impact and shock

Physical and Chemical properties

Quality
Niter Acrylic paint

• Colour: different RAL colors
• Degree of gloss: (measurement by irradiation angle 60 ° in accordance with DIN 67530)
• Glossy hues: 80 gloss units
• Yield:
  It depends on the porosity and the background color.
  400 ml are sufficient for about 1.3 m² depending on color
• Drying (at 20 ° C, 50% atmospheric humidity):
  Dust dry: after 10 minutes
  The power outlet after ca. 50 minutes
  The drying times are dependent on the surrounding temperature, the degree of humidity and the thickness of the applied layer.
• Thermal resistance: up to 80 ° C
• Storage life:
  10 years specially stored at a temperature between 10 ° C and max 25 ° C and an atmospheric humidity of maximum 60%.
• Contents: 400 ml

Labeling

• Environmentally friendly
  all products MOTIP DUPLI are 100% free of heavy metals and contain since 1977 CFC-free propellants. The caps and packagings are made of recyclable material.
• Disposal
  Follow the local code
• All products MOTIP DUPLI are meeting the current regulations regarding the classification and labeling under the EU Directive 1999/45 / EG. All aerosols correspond to TRGS 200 and TRG 300 in accordance with Directive 75/324 / EEC (the Directive governing aerosols) according to the latest version.

How-To

Before use, read carefully and observe the information on the label.

Pretreatment of the fund:

• The surface must be clean, dry and degreased
• If there is rust, sand the surface and apply advance Fund Antiruggine DUPLICOLOR.
• Fill and sand any rough surfaces.
• Apply DUPLI-COLOR Filler or putty spray DUPLI-COLOR parts stuccoed and sanded.
• On plastic parts we recommend the use of DUPLI-COLOR Plastic Primer.
• Mask the parts not to be painted

Painting:

• Before use shake well the bottle for about 3 minutes.
• Make a spray test in a hidden, so also verify compatibility.
• Apply more thin layers in hands crossed at intervals of 3-5 minutes at a spraying distance of ca. 25 cm.
• Do not spray on surfaces treated with paints based on synthetic resins.

Suggestions:

For minor adjustments you may want to use as a mask a piece of cardboard with a hole a little 'largest area to be treated. The box must be kept at a distance of ca. 1-2 cm from the surface to be painted. With this method good part of the spray mist is collected from the carton.

Operating temperature: it must be between 10 ° C and a maximum of 25 ° C

Atmospheric humidity: max 60%.

Store in a cool, dry place. Protect from sunlight and other heat sources. Apply in dry, sheltered from the wind but also well ventilated. Carefully read the instructions.